1. Use hot oil to scald or immerse the bearing in an oil bath, the temperature should not exceed 100 ℃, so as not to reduce the hardness of the bearing.
2. When cleaning, do not rotate the bearing too fast, so as to avoid foreign impurities in the bearing from straining the rolling surface.
3. Do not wipe the bearing with cotton yarn, use a clean cloth to prevent the thread end from entering the bearing.
4. After the bearing is washed, try not to touch it with your hands. A small amount of sweat on your fingers will cause the bearing to rust. The best way is to wear gloves, or wrap the bearing with a clean white cloth or paper, and then use your hands. take.
5. If the bearings that have been cleaned are not used in time, they must be wrapped with oiled paper and opened when they are used.
Ningbo Shitai Precision Machinery Co., Ltd. is a motor shaft manufacturer and a spline shaft manufacturer, welcome to visit our official website.